Centrifugal Pump

Summary

SL type vertical split case pump is with vertical installation, the suction port and discharge port are in the horizontal direction, the separation surface of the centrifugal pump body and the middle-opening pump cover is vertically separated on the axis center line, and it is not necessary to disassemble the water inlet, outlet return pipeline and motor during maintenance. Lift the pump cover and remove the rotor assembly. The upper shaft of the pump adopts rolling bearings, lubricated with grease, and there is no cooling cavity on the bearing body. The lower bearing of the pump is a guide bearing, which is lubricated and cooled by the water of the split centrifugal pump itself. The shaft seal adopts two forms of soft packing seal and mechanical seal.

It is mainly used in heavy duty water works like:

•  building water supply,

• irrigation,

• drainage pumping station,

• power station,

•  industrial water supply system,

• fire protection system,

• shipbuilding industry, etc.

• residential water supply and pressurization,

• industrial boiler feed water,

• air conditioning system,

• circulating water,

• water treatment

• reverse osmosis system,

• food industry

• pharmaceutical industry.

Advantage

The hydraulic design of the vertical split case pump impeller adopts advanced CFD technology, thus improving the hydraulic efficiency of the S pump. Dynamically balance the impeller to ensure smooth operation of this pump.

Structure

Product details