English
ÖÐÎÄ°æGear Pump
-
KCB gear oil pump
KCB gear oil pump is mainly used to transport lubricating oil goods. Stainless steel gear pump, can transport non-lubricating oils, beverages, and low-corrosive liquids. Equipped with copper gears, it can transport low internal point liquids, such as gasoline, benzene, etc. The pump gears are all made of hard tooth surfaces, and a safety valve is included to protect the motor from overload.
Details -
NYP resin internal gear pump
NYP electric internal gear pump works on a similar principle except the two linking gears sizes are different with one revolving within the other. The rotor is a larger gear and also an inner gear, and it has the teeth projecting inside. A minor external gear is mounted, and this is mainly designed for linking by the rotor so that the teeth of the gear connected at a single end. A bushing and pinion can be connected to the pump case that holds the idler within the location.
Details -
3A Lobe Pump
3A rotary lobe pump with gear reducer, also known as positive displacement colloid pump, not only has the same uses and features as other gear pumps, but also has its own unique design, lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, which is especially suitable for conveying high-viscosity colloidal materials and won¡¯t change any chemical and physical properties of the liquid.
Details