English
中文版Submerged pump
-
YW submerged sewage pump
Based on the hydraulic model of QW submerged sewage Pump, according to the user’s requirements, we design YW submerged sewage pump，it is suitable for wastewater drainage. Liquid temperature ≤ 60 ℃, liquid PH value is 4 ~ 10.
Details -
NL wast water immersion pump
NL wast water immersion pump is a single-stage single-suction vertical centrifugal mud pump. The impeller is three single-circle chord curved leaves, semi-open impeller and malleable cast iron, so it has high strength and corrosion resistance; has good pass ability and high efficiency. The mud pump seat is equipped with four skeleton oil seals and shaft sleeves to prevent shaft wear and prolong the service life of the shaft.
Details -
FY vertical submerged centrifugal pump
The FY series vertical submerged centrifugal pump pump is a new type of pump produced by our company based on the traditional corrosion-resistant submerged pump, integrating the advanced technology of the same product of Sulzer, Switzerland, and improving the design; this pump cancels the common use of other submerged pumps.
Details -
LJC Turbine Submerged Pump
LJC Turbine Submerged Pump，also called axial flow deep well fire pump set is a immersion pump composed of single or multiple or mixed flow impellers and guide casings, lift pipes, drive shafts, pump plate, motors and other components. The pump base and motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the lift pipe, which drives the impeller to generate flow and lift.
Details -
FSY glass fiber reinforced plastic pump
There are two types of glass fiber reinforced plastic pump , WSY and FSY, produced by this unit. 1. WSY pump is a vertical glass fiber reinforced plastic submerged vortex pump. 2. The FSY pump is a vertical FRP submerged centrifugal pump. Because the pump extends into the storage tank, the depth of the storage tank is different, and the designed submerged depth is between 800mm and 3000mm. As long as the liquid is higher than the pump body, the liquid can be started without filling the liquid. There are leakage holes under the flat cover, and the liquid will not leak to the outside of the storage tank.
Details