Centrifugal Pump

Summary

ISWB explosion proof oil centrifugal pump is specially designed to transport petroleum products, such as gasoline, kerosene, diesel and other petroleum products, and the temperature of the medium being transported is -20℃ ~ +120℃. The standard is ISO2858 & JB/T53058-93.

Note: we also manufacture water pump, anti-corrosive pump, magnetive driven pump, oil pump with special design.

Construction

	Item	Description
	1	Pump Casing
	2	Impeller
	3	Impeller Nut
	4	Mechanical seal
	5	Pump Cover
	6	Shaft Slinger
	7	Plug
	8	Motor
	9	Baseplate

Advantages

ISWB explosion proof oil centrifugal pump are widely used in Petrochemical process because they have a wide range of performance applications (including flow rate, pressure head and adaptability to medium properties), small size, simple structure, easy operation, uniform flow, fewer failures, and long life. The outstanding advantages of long, low acquisition cost and operating cost are.

Pump details

1. The suction pressure is less than or equal to 1.6MPa, or the high working pressure of the pump system is less than or equal to 1.6MPa, that is, the suction port pressure of the pump + the pump head is less than or equal to 1.6MPa, and the static pressure test pressure of the pump is 2.5MPa. Please indicate the system work when ordering. pressure. When the working pressure of the ISWB type horizontal single-stage explosion-proof pipeline centrifugal pump system is greater than 1.6MPa, it should be put forward separately when ordering, so that the overcurrent part and the connecting part of the pump are made of cast steel material.

2. Ambient temperature <40℃, relative humidity <95%.

3. The volume content of solid particles in the conveyed medium does not exceed 0.1% of the unit volume, and the particle size is less than 0.2 mm.

4.Note: If the medium used is with fine particles, please indicate it when ordering, so that the manufacturer can use the wear-resistant mechanical seal.

5.Power Specs: 220V/240V380/415V, 1/ 3phase; 50hz/60hz

6.Max.permissible fluid temperature: 80~240℃ (464°F)

7.Type of connection: Flange

8.Casing material: Cast iron, Stainless steel, Duplex SS, Bronze

9. Maximum caliber:   500mm(20inch)

Scope of application

(1) ISW/ISG Inline centrifugal pump is sutable for industrial and urban water supply, drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC Refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment matching, the operating temperature T < 80 ℃.

(2) ISWR/ IRG hot water circulation pipeline pump, suitable for metallurgy, chemical industry, textile, wood processing, papermaking, high temperature hot water pressurized circulation transportation of boilers in restaurants, bathrooms, hotels, etc., as well as urban housing heating circulation pumps, the operating temperature is 120 ℃ the following. If higher temperature liquid, contact and we will design and customzie for you.

(3) ISWH/ IHG type chemical stainless steel centrifugal pump, suitable for conveying corrosive liquid medium without solid particles, widely used in petroleum, chemical industry, metallurgy, papermaking, food, pharmaceutical and synthetic fiber and other departments, its use conditions: -20 °C ≤ temperature ≤ 120°C.

(4) ISWB/YG type explosion-proof oil pipeline pump, which is specially designed to transport petroleum products, such as gasoline, kerosene, diesel and other petroleum products, and the temperature of the medium being transported is -20℃ ~ +120℃.