English
ÖÐÎÄ°æCentrifugal Pump
-
ISW horizontal inline pump
ISW series inline close coupled pump are designed according to ISO2858 & JB/T53058-93 standard. It is used to transfer clean water, and other liquids that physical properties which are similar to those of pure-water, applicate in industrial and city water supply and drainage, high buildings booster water supply, garden irrigation, fire-fighting booster, remote water supply, heating systems, circulating booster of cold & hot water in bath rooms. The pumped liquid should be below 80¡æ.
Details -
ISWR high temperature centrifugal pump
ISWR high temperature centrifugal pump is a single-stage single-suction cantilever centrifugal pump, suitable for heating, hot water, air conditioning systems in various buildings and industries such as metallurgy, rubber, printing and dyeing, and sugar making department. It is used to transport the medium whose temperature does not exceed 120¡æ and whose inlet pressure does not exceed 0.8MPa.
Details -
ISWB explosion proof oil centrifugal pump
ISWB explosion proof oil centrifugal pump is specially designed to transport petroleum products, such as gasoline, kerosene, diesel and other petroleum products, and the temperature of the medium being transported is -20¡æ ~ +120¡æ. The standard is ISO2858 & JB/T53058-93.
Details -
ISWH SS non clog centrifugal pump
ISWH SS non clog centrifugal pump is used for conveying liquids without solid particles, corrosive, and viscosity similar to water. It is suitable for petroleum, chemical, metallurgy, electric power, papermaking, food, pharmaceutical and synthetic fiber sectors. The operating temperature is - 20¡æ¡«+105¡æ.
Details -
ISG vertical inline centrifugal pump
ISG series inline close coupled pump are designed according to ISO2858 & JB/T53058-93 standard. It is used to transfer clean water, and other liquids that physical properties which are similar to those of pure-water, applicate in industrial and city water supply and drainage, high buildings booster water supply, garden irrigation, fire-fighting booster, remote water supply, heating systems, circulating booster of cold & hot water in bath rooms. The pumped liquid should be below 80¡æ. Note: we also supply hot water pump, high temperature pump, chemical pump, oil pump with special design.
Details -
IRG,SGR hot water inline vertical centrifugal pump
IRG/SGR series vertical hot water pipeline pump produced by Yangtze, the pipeline pump implements the standard JB/T6878-2006, this series of products is a novel electric pump developed for pipeline pressurized transportation and to solve the problem of low pipeline pressure Pump.
Details -
IHGB/ISGB/TD marine vertical sea water centrifugal pump
IHGB marine vertical sea water centrifugal pump£¬ also as known as stainless steel corrosion-resistant inline pump,pipeline pump, booster pump. The pump structure is designed accordance with the international standard ISO2858 . The flow range is 1.1~1345m3/h, the lift range is 2.8~150m
Details -
GW sewage dredge inline pump
GW sewage dredge inline pump adopts unique impeller structure and new mechanical seal, which can effectively transfer liquid with solid particles and long fibers. Compared with the traditional impeller, the impeller of the pump adopts the form of single flow channel or double flow channel. With a reasonable volute chamber, the pump has high efficiency£¬and no vibration during operation.
Details -
GDL multistage centrifugal inline pump
GDL multistage centrifugal inline pump are designed according to ISO2858 & JB/T53058-93 standard. It is used to transfer clean water, and other liquids that physical properties which are similar to those of pure-water, applicate in industrial and city water supply and drainage, high buildings booster water supply, garden irrigation, fire-fighting booster, remote water supply, heating systems, circulating booster of cold & hot water in bath rooms.
Details -
YG explosion proof oil inline centrifugal pump
YG explosion proof oil inline centrifugal pump is designed by Yangtze R&D team , used the performance parameters of IS centrifugal pump, combined design on the basis of ordinary vertical pumps. hot water, high temperature, corrosive chemical pumps, and oil pumps. This series of products has the advantages of high efficiency and energy saving, low noise and reliable performance, and meets the requirements of the new National Ministry of Machinery JB/T53058-93.
Details -
IS single end suction water pump
IS single end suction water pump is based on standard ISO2858. It is good choice as an energy-saving axial intake centrifugal pump. IS pump have wide versatility because the shafts, bearings and shaft seals of the same specification can be interchanged. The advantages of this single-stage single-suction centrifugal pump are: the whole series of hydraulic performance has a reasonable layout, a wide range of user choices, and convenient maintenance; the efficiency and suction lift reach the international average advanced level.
Details -
IR high temperature overhung centrifugal pump
IR high temperature overhung centrifugal pump is with similar structure with IS type end suction pump. The only difference point IR shaft seal way. IR type pump normally install with mechanical seal way to transfer the liquid temperature lower than 104¡æ.
Details -
RY thermal oil centrifugal pumps
RY series thermal oil centrifugal pump is developed by absorbing the characteristics of various advanced technology. It can be widely used in petroleum, grease, boilers, construction, road maintenance, pharmaceuticals, plastics, It is an ideal heat carrier medium circulating pump in the industrial fields of rubber, fiber-containing textile, printing and dyeing, and the operating temperature is less than or equal to 370¡æ.
Details -
XS/YPS double suction centrifugal water pump for irrigation
S-type single-stage double suction centrifugal water pump for irrigation has the characteristics of long life, high efficiency, reasonable structure, low operating cost, convenient installation and maintenance, etc. It is an ideal for irrigation, fire protection, air conditioning, chemical industry, water treatment and other industries.The design pressure of the pump body is 1.6MPa and 2.0MPa.
Details -
XSL vertical split case pump
XSL type vertical split case pump is with vertical installation, the suction port and discharge port are in the horizontal direction, the separation surface of the centrifugal pump body and the middle-opening pump cover is vertically separated on the axis center line, and it is not necessary to disassemble the water inlet, outlet return pipeline and motor during maintenance.
Details -
CDL/CDLF vertical multistage centrifugal boosting pump
CDL/CDLF vertical multistage centrifugal boosting pump, which are multi-functional products. They can be used to convey various mediums from tap water to industrial liquid at different temperature and with different flow rate and pressure. CDL type is applicable to conveying non-corrosive liquid, while CDLF is suitable for slightly corrosive liquid.
Details -
TSWA high pressure sea water multistage pump
TSWA type high pressure sea water multistage pump is a series of horizontal, single-suction multi-stage and segmented structures, which are newly developed and produced energy-saving products. It has significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure and long service life due to the excellent hydraulic model and low-speed motor.
Details -
DL centrifugal vertical multistage pump
DL and DLR pumps are vertical single-suction multi-stage segmented centrifugal pumps, which are used to transport clean water without solid particles and liquids with physical and chemical properties similar to water. It is mainly used for water supply of high-rise buildings, and can also be used for water supply and drainage in factories and mines. The flow range of conveying liquid is 4.9¡«200m3/h, the range of lift is 22¡«239m, the range of matching power is 1.5¡«160KW, and the range of diameter is ¦Õ40¡«¦Õ150mm.
Details -
D/DG boiler feed water multistage centrifugal pump
D-type boiler feed water multistage centrifugal pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system.
Details -
QJ deep well multistage submersible pump
QJ deep well multistage submersible pump is a high-performance wear-resistant electric pump produced. Select high-quality stainless steel shell, shaft core, coupling, water inlet and pump head (or copper alloy water inlet and pump head), high-strength and wear-resistant new composite polymer impeller and stainless steel guide shell, new floating type The structural impeller has no axial pressure on the motor during operation.
Details -
QW Submersible sewage water Pump
Yangtze¡¯s QW Submersible Pump is applied with the advanced Germany technology, combined with the efforts of technician in our company, our submersible pump is an advanced model among similar products in domestic and overseas. This pump has the features of high energy-saving efficiency, unique structure etc.
Details -
JYWQ Automatic Mixing Submersible Pump
JYWQ, JPWQ type Automatic Mixing Submersible Pump adopts automatic stirring device on the basis of QW series submersible sewage pump. The sewage pump device rotates with the motor shaft to generate a strong stirring force to stir the sediment in the sewage pool into suspended matter , inhaled into the pump and discharged, which improves the anti-blocking and sewage discharge capacity of the pump, completes the drainage, cleaning, and silt removal at one time, which saves the operating cost.
Details -
LW Vertical Sewage dredge Pump
LW type vertical sewage pump large flow channel anti-clogging hydraulic components design, no clogging, can be installed in any direction, dry installation is easy to maintain.
Details -
WQK Submersible Pump with Cutter
WQK Submersible Pump with Cutter is absorbed the advanced technology of West Germany, developing and producing sewage equipment. It has a particularly strong ability to discharge sewage and has good cutting performance. Belts, cloth strips, straws, ropes and other impurities are chopped and discharged easily.
Details -
ZW/ZX Self priming sewage centrifugal pump
The ZW Non Clogging Sewage self priming pump is based on the diffuser principle, This pump is a combination of self priming and non clogging.It adopts the axial return external mixing type, and through the unique design of the pump body and the wide flow channel of the impeller, not only has the function of self priming without foot valve and injected water which is same as self priming clear water
Details -
ZX Self Priming Pump
The ZX self priming pump is based on the diffuser principle, which means that the priming ability is independent of valves and other mechanical elements as it is the flow of liquid that carries the air. Before first starting the pump, the casing must be filled with liquid.
Details -
ZWL,ZXL Close-coupled Self priming sewage pump
The ZWL Non Clogging Sewage self priming pump is based on the diffuser principle, This pump is a combination of self priming and non clogging.It adopts the axial return external mixing type, and through the unique design of the pump body and the wide flow channel of the impeller, not only has the function of self priming without foot valve and injected water which is same as self priming clear water
Details -
SP self priming trash pump
The SP 6inch trash pump is also called non-clogging self-priming sewage pump is with advantages of short self-priming time, self-priming, high height, strong anti-blocking ability, fast cleaning speed and so on.
Details -
-
JMZ stainless steel self priming pump
stainless steel self priming pump JMZ and FMZ are assembled with new mechanical seals, which are safe and explosion-proof, and have no leakage for many years. They are suitable for transporting various wines, beverages, dairy products, pharmaceuticals, gasoline, solvent oil, syrup, etc. More than 40 degrees suction lift will be significantly reduced).
Details -
IH single stage acid resistant centrifugal pump
Yangtze IH type single stage acid resistant centrifugal pump, which is a single-stage single-suction cantilever centrifugal pump, and its rated performance points and dimensions are in accordance with the international standard ISO2858-1975 (E). It is one of the energy-saving pump products popularized in worldwide.
Details -
IHF PTFE/PFA lined chemical transfer pumps
IHF type PTFE lined chemical transfer pumps, which is fluorinated ethylene propylene lined cast iron casing chemical centrifugal pump, which is designed and produced according to international standards ISO 15783 and ISO 5199. The pump has corrosion resistance, wear resistance, high temperature resistance and no aging. , High mechanical strength, non-toxic decomposition, wide operating temperature, transport medium temperature of -85¡æ-200¡æand so on.
Details -
LQCZ ISO5828 chemical process pump
Yangtze standard ISO5828 chemical process pump which is Horizontal, single-stage, volute casing pumps . The pump design is easy for maintenance, only need to dismantle spacer coupling . Have larger range of performance data than conventional centrifugal pump, permits dismantling of complete bearing unit towards the drive end. If a spacer coupling is used it is also unnecessary to disconnect the motor.
Details -
LQZP API610 Petrochemical Process Centrifugal Pump
Series ZP API610 Petrochemical Process Centrifugal Pump can be used where the requirement is for trouble-free pumping of conveying clean or particle-containing liquids, low-temperature or high-temperature liquids, medium-sized or corrosive liquids like: sulphuric acid, nitric acid, hydrochloric acid, phosphoric acid etc., inorganic and organic acid solutions of various temperatures and concentrations; sodium hydroxide, sodium carbonate etc.
Details -
FP PVDF chemical centrifugal pump
FP (FS) series chemical pump with direct coupling structure couples pump casing and bracket with motor flange. The bracket supports the casing and the impeller directly connected with motor through shaft. PVDF chemical centrifugal pump is fitted with mechanical seal, and introducing international advanced technology and technical formula to use CFR-PP and improved ARS as pump material which fully demonstrates its advanced design.
Details -
FS Glass Fiber Reinforced Plastic Pump
S horizontal glass fiber reinforced plastic sulfuric acid transfer pump is a single-stage single-suction centrifugal inline pump. It is suitable for transporting various concentrations of hydrochloride acid, low concentration sulfuric acid and other non-oxidizing strong acids, organic acids, inorganic salts and various organic solvents.
Details -
chemical plastic,SS sump pump
The FY series vertical submerged centrifugal pump pump is a new type of pump produced by our company based on the traditional corrosion-resistant submerged pump, integrating the advanced technology of the same product of Sulzer, Switzerland, and improving the design; this pump cancels the common use of other submerged pumps.
Details -
LQFZ,SFB,SFBX chemical transfer centrifugal pump
Yangtze SFB/SFBX chemical transfer centrifugal pump, at present the main product is the stainless steel centrifugal pump includes two major series: with self-priming and without self-priming.Our products are mainly used to transport corrosive media with sanitary requirements and widely applied in industries such as food£¬beverage, pharmaceuticals, cosmetic, sewage treatment, chemicals (fine chemicals)and electroplating.
Details -
YQF PFA lined chemical transfer pump
PFA lined chemical transfer pump is also called fluoroplastic lined inline pump. The lining material have PTFE, PFA for choice. It is designed and manufactured by our company according to market demand and with reference to international standards. This product is widely used in: pickling process, painting process, electrolyte transportation in non-ferrous metal smelting, chlorine water in ionic membrane caustic soda projects, waste water treatment and acid addition processes; applicable temperature: -20 ¡æ - 200 ¡æ .
Details -
EB FRPP self priming centrifugal pump
EB-type Fiber reinforced polypropylene self-priming centrifugal pumps, EB-A-type engineering plastic centrifugal pump series,EB-P PVDF Polyvinylidene Fluoride plastic centrifugal pump serie, all used shaft seals, way, which is with advantage of compact structure, light weight, small size, long duty life.
Details -
ZS FRPP shaft seal priming pump
ZS type FRPP shaft seal priming pump (abbreviation: FS glass fiber reinforced plastic pump) is a new type of centrifugal pump formed by high temperature molding using new polyvinyl butyral and modified phenolic glass fiber materials according to the characteristics and technical requirements of IS type water pumps. class products. It has good corrosion resistance, high temperature resistance, light weight, high specific strength, no deformation, etc.
Details -
NHCN,NHCW chemical plastic sump pump
It is widely used, such as etching line, waste water treatment equipment, washing tower, chemical liquid with high temperature or containing crystallization, and various liquid circulation and transportation operations in chemical mixing tank or reaction tank. It can also be used as heat exchange circulation and cooperate with the filtration operation of filter.
Details -
CQ,CQB Stainless Steel magnetic drive centrifugal pump
The CQB type pump can be customized with a heating jacket on the pump volute for pumping liquids that cannot be pumped in the cold state or that would cool down to below the solidification point when the pump is stopped. CQB magnetic drive centrifugal pump is designed according to HG/T 2730 standard. It applies modern magnetic principles and uses the magnetic drive of permanent magnets to achieve non-contact transmission of torque.
Details -
CQB-G High temperature Magnetic Drive Pump
CQB-G High temperature Magnetic Drive Pump (referred to as high temperature magnetic pump).The magnetic material of the magnetic coupling adopts a high temperature medium to maintain a strong magnetic torque. A water cooling device is installed between the motor and the magnetic coupling to prevent the heat of the pumped high-temperature medium from being conducted to the motor. In order to maintain the normal operation of the motor, so as to achieve leakage-free delivery of high-temperature media. The over-current parts of the pump can be made of corrosion-resistant materials such as 304, 304L, 302, 321, 316, 316L, UB6, CD4Mcu, titanium alloys, nickel-based alloys, etc., respectively.
Details -
CQB-GB High temperature Heat Jacket Magnetic Drive Pump
CQB-GB High temperature Heat Jacket Magnetic Drive Pump is designed according to HG/T 2730 standard CQB type stainless steel magnetic pump. The heat Jacket type is , ZMD fluoroplastic self-priming magnetic pump, IMD type fluoroplastic magnetic drive pump
Details -
CQB-L Vertical Magnetic Drive chemical Pump
Magnetic pipeline centrifugal pump is a new type of pipeline pump developed by our company on the basis of more than ten years of experience in designing and manufacturing horizontal magnetic pumps. It has both the characteristics of ISG type pipeline centrifugal pumps and the advantages of magnetic chemical pumps. Leak-free pipeline centrifugal pump.
Details -
CQB-F PTFE Lined Magnetic Drive Pump
CQB-F PTFE Lined Magnetic Drive Pump is a new product made of polyvinylidene fluoride and designed according to JB/T7742-95 standard. This material is currently the world's best corrosion-resistant material. Wide range, strong corrosion resistance, high mechanical strength, no aging, no toxin decomposition etc.
Details -
ZCQ Magnetic Drive self-priming centrifugal Pump
ZCQ type Magnetic Drive self-priming centrifugal Pump, is a new product that has been successfully researched and tested on the basis of CQ type magnetic pump according to the requirements of many users. ,which not only has the function of CQ type magnetic drive pump, but also self-priming, no need bottom valve and the self-priming height is 4 meters.
Details -
CQF Plastic Magnetic Drive Pump
The CQF Plastic Magnetic Drive Pump replaces the dynamic seal with the static seal, so that the wetting parts of the pump are in a completely sealed state, which completely solves the problems of running, dripping and dripping . Ceramic, reinforced polypropylene is used as the manufacturing material, so the CQF mini magnetic pump has excellent anti-corrosion function, and can make the actual conveying medium free from contamination.
Details -
-
CYZ-A Shipyard Self Priming Oil Pump
CYZ, CYZ-A, CYZL-A shipyard Self priming oil pump is our newest pump product which has been developed and combine of foreign and domestic technology. This pump is made of high quality materials, using carbide metal mechanical seal which is durable. No relief valve in the outlet pipelines and no bottom valve in the inlet. Simple structure, convenient operation, stable working, easy maintenance, high efficiency.
Details -
YW submerged sewage pump
Based on the hydraulic model of QW submerged sewage Pump, according to the user¡¯s requirements, we design YW submerged sewage pump£¬it is suitable for wastewater drainage. Liquid temperature ¡Ü 60 ¡æ, liquid PH value is 4 ~ 10.
Details -
NL wast water immersion pump
NL wast water immersion pump is a single-stage single-suction vertical centrifugal mud pump. The impeller is three single-circle chord curved leaves, semi-open impeller and malleable cast iron, so it has high strength and corrosion resistance; has good pass ability and high efficiency. The mud pump seat is equipped with four skeleton oil seals and shaft sleeves to prevent shaft wear and prolong the service life of the shaft.
Details -
FY vertical submerged centrifugal pump
The FY series vertical submerged centrifugal pump pump is a new type of pump produced by our company based on the traditional corrosion-resistant submerged pump, integrating the advanced technology of the same product of Sulzer, Switzerland, and improving the design; this pump cancels the common use of other submerged pumps.
Details -
LJC Turbine Submerged Pump
LJC Turbine Submerged Pump£¬also called axial flow deep well fire pump set is a immersion pump composed of single or multiple or mixed flow impellers and guide casings, lift pipes, drive shafts, pump plate, motors and other components. The pump base and motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the lift pipe, which drives the impeller to generate flow and lift.
Details -
FSY glass fiber reinforced plastic pump
There are two types of glass fiber reinforced plastic pump , WSY and FSY, produced by this unit. 1. WSY pump is a vertical glass fiber reinforced plastic submerged vortex pump. 2. The FSY pump is a vertical FRP submerged centrifugal pump. Because the pump extends into the storage tank, the depth of the storage tank is different, and the designed submerged depth is between 800mm and 3000mm. As long as the liquid is higher than the pump body, the liquid can be started without filling the liquid. There are leakage holes under the flat cover, and the liquid will not leak to the outside of the storage tank.
Details